SPECIFICATION

SPECIFICATION

DC OUTPUT VOLTAGE

+5.8V(COM)

+4.2V(COM)

+5V(GND)

OUTPUT V.TOLERANCE

±3%

±2%

±2%

OUTPUT RATED CURRENT

1.2A

4.0A

0.1A

OUTPUT CURRENT RANGE

0.0-1.2A

0.20-4.0A

0.0-0.1A

RIPPLE&NOISE

50mV

50mV

50mV

LINE REGULATION

±0.2%

±0.2%

±0.2%

LOAD REGULATION

±3%

±2%

±1%

DC OUTPUT POWER

 25W

EFFICIENCY

 75% TYPICAL AT FULL LOAD.

INPUT VOLTAGE RANGE

 90~270VAC   47Hz~63Hz

AC CURRENT

 0.26/220V

INRUSH CURRENT

 COLD START 50A/220VAC

LEAKAGE CURRENT

 ------------

OVERLOAD PROTECTION

 ≥150%  ALL OUTPUT

OVER VOLTAGE PROTECTION

 ------------

SHORT CIRCUIT PROTECTION

 +4.2V OUTPUT

OVER TEMP.PROTECTION

 ------------

TEMP.COEFFICIENT

 ±0.3%/J (0~45 J)

SETUP,RISE,HOLD UP TIME

 200ms, 100ms, 30ms/220VAC

WITHSTAND VOLTAGE

 I/P-O/P：1.5KVAC I/P-FG：1.5KVAC 1MIN 5mA

ISOLATION RESISTANCE

 I/P-O/P：500VDC/50MΩ

WORKING TEMP.,HUMIDITY

 -10 J~+50 J (REFER TO OUTPUT DERATING CURVE), 20%~90% RH

STORAGE TEMP.,HUMIDITY

 -10 J~+60 J, 10%~95% RH

DIMENSION

 110*78*36mm

WEIGHT

 -----------

MTBF

 50,000 HRS MIN. AT FULL LOAD AND 25 J

EMC STANDARDS

 IEC1000, EN61000

NOTE:   1.ALL PARAMETERS ARE SPECIFIED AT 230VAC INPUT,RATED LOAD,25℃ 70% RH.AMBINT.

          2.TOLERANCE GINCLUDE SET UP TOLERANCE, LINE REGULATION, LOAD REGULATION.

          3.RIPPLE & NOISE ARE MEASURED AT 20MHZ BY USING A 12” TWISTED PAIR TERMINATED WITH A 0.1UF&47UF CAPACITER.

          4.LINE REGULATION IS MEASURED FROM LOW LINE TO HIGH LINE AT RATED LOAD.

        5.LOAD REGULATION IS MEASURED FROM 0% TO 100% RATED LOAD.