LED电源测试系统
地区城市：广东省－深圳 更新时间：2011-3-18 17:53:53
联 系 人：许先生 有效期限：2012-3-18 14:58:29
公司名称：深圳市新能基科技有限公司
电子信箱：apex_xu@163.com 联系电话：13377782881
|
ATC1500-S适用于电源厂生产线测试使用. |
|
测试速度快，同时可迅速形成测试报表， |
|
有效的提高了工厂的品质控制能力。 |
|
|
ATC1500-S
LED驱动电源自动系统
介 绍
适用：150W以下单路输出之充电器，电源适配器，LED驱动电源！
（客户自备电脑+显示器）
概述：
系统结构：测试架+ATC150主机（内含 150W电子负载，功率计模块，示波器模块，AC源）
尺寸：500x450x133mm 总体重量：20KG
主要功能特点：
1.可以测试150W以内任何单组输出电源
2.图形界面基于Windows XP环境
3.测试程序编辑功能
4.测试项目选择功能（输入/输出/空载/短路
5.欠压/稳压/过载/纹波/效率等功能）
6.统计测试报告（Excel电子档）
7.自动生成CPK等品质报表
8.配置灵活
9.性价比高，适合大中小企业。
10.测试速度快
11.测试不良结果实时打印功能
测试项目：
启动测试(Start-up)
欠压测试(UVLO)
待机测试(Idle)
恒压区测试(Standard CV)
恒流区测试(Standard CC)
LED驱动电源测试（LED）
短路测试(Short Circuit)
过压测试(Over Voltage)
过流测试(Over Current)
线调整(Line Regulation)
负载调整(Load Regulation)
关机测试(Power Down)
支持性测试(Support Function)
|
Test Name |
Parameter and Range(测试项目与量程) |
Accuracy |
|
START UP 启动测试 |
Inrush current: 0 – 83Apk Startup time: 0 to 32767msec. Output voltage overshoot: 0 – 60Vpk |
±1% (reading + range) ±1ms ±1% (reading + range) |
|
UVLO欠压测试 |
Functional test only, Pass/Fail |
N/A |
|
IDLE待机测试 |
Standby input power: 0 – 5/25/250/1250W Standby input current: 0 – 0.1/0.5/5/25Apk Input voltage: 30 – 280V*Note 2 |
±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) |
|
STANDARD CV (Constant Current and Constant Resistance load) 恒流 |
CC Mode: 0 – 3/15 A CR Mode: 0.1 – 50Ohm Input Voltage: 30 – 300Vrms *Note 1 Input Current: 0 – 0.1/0.5/5/25Apk Input Power: 0 – 5/25/250/1250W Power Factor 0 – 1.0 Output Voltage 0 – 15/60Vdc Output Current 0 – 3/15Adc Efficiency: 0 – 100% Ripple/Noise 200kHz: 0 – 500mV Ripple/Noise 20MHz: 0 – 500mV |
±0.15% (setting + range) ±0.3% (setting + range) *Note 2 ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.05% (reading + range) ±0.1% (reading + range) ±0.25% (reading + range) ±2% (reading + 5mV) ±2% (reading + 5mV) |
|
STANDARD CC (Constant Voltage and Constant Resistance load)恒压 |
CV Mode: 0 – 15/60V CR Mode: 0.1 – 50Ohm Input voltage: 30 – 300Vrms *Note 1 Input Current: 0 – 0.1/0.5/5/25Apk Input Power: 0 – 5/25/250/1250W Power Factor 0 – 1.0 Output Voltage 0 – 15/60Vdc Output Current 0 – 15Adc Efficiency: 0 – 100% |
±0.15% (setting + range) ±0.3% (setting + range) *Note 3 ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.05% (reading + range) ±0.1% (reading + range) ±0.25% (reading + range) |
|
LED Driver Test (LED Load) LED驱动 |
Input voltage: 30 – 300 Vrms *Note 1 Input Current: 0 – 5/25Apk Input Power: 0 – 250/1250W Power Factor 0 – 1.0 Output Average Current reading: 0 – 15Adc Output Average Voltage reading: 0 – 60Vdc Output pulsed current reading (TRIAC, PWM) |
±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.1% (reading + range) *Note 4 ±0.05% (reading + range) *Note 4 ±0.5% (reading + range) |
|
SHORT CIRCUIT
短路测试 |
Input voltage: 30 – 300 Vrms *Note 1 Input Current: 0 – 5/25Apk Input Power: 0 – 250/1250W Power Factor 0 – 1.0 Output Average Current: 0 – 15Adc |
±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.2% (reading + range) *Note 4 |
|
OVER CURRENT 过流 |
Current trip point: 0 – 3/15Adc Trip point voltage: 0 – 15/60Vdc Wait Time >= 10msec. Wait Time < 10msec. Voltage Before Trip Point: 0 – 15/60Vdc Current Before Trip Point: 0 – 3/15Adc |
±0.1% (reading + range)
±0.05% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) |
|
OVER VOLTAGE 过压测试 |
OV trip point: 0 – 60V |
±0.1% (reading + range) |
|
LINE REGULATION 线性调整率 |
Voltage regulation: 0 – 100% |
±0.1% (reading + range) |
|
LOAD REGULATION 负载负整率 |
Voltage regulation: 0 – 100% |
±0.1% (reading + range) |
|
AVERAGE EFFICIENCY 平均效率 |
Efficiency: 0 – 100% |
±0.25% (reading + range) |
|
I-V CURVE PLOT I-V曲线 |
CC Mode: 0 – 3/15 A CC Mode Output Voltage 0 – 15/60Vdc CC Mode Output Current 0 – 3/15Adc CV Mode: 0 – 15/60V CV Mode Output Voltage 0 – 15/60Vdc CV Mode Output Current 0 – 15Adc |
±0.15% (setting + range) ±0.05% (reading + range) ±0.1% (reading + range) ±0.15% (setting + range) ±0.05% (reading + range) ±0.1% (reading + range) |
|
POWER DOWN 关机测试 |
Holdup time: 0 – 65535 msec. Input voltage: 30 – 300Vrms *Note 1 Output Current 0 – 3/15Adc Output voltage overshoot: 0 – 60Vpk |
±1ms ±0.1% (reading + range) ±0.1% (reading + range) ±1% (reading + range) |
|
Global Setting |
Load On Voltage: 0 – 60Vdc Wait Time: 0 – 32767msec. Nominal Output Voltage: 0 – 60Vdc Nominal Output Current: 0 – 15Adc |
±1% (reading + range) ±1ms ±1% (reading + range) ±1% (reading + range) |
|
Optional Setting 支持性功能 |
Bias Output Voltage : 0 – 28Vdc Relay State rated current: 3A |
±0.2% (reading + range) - |
STS带给企业的优势
1.能有效地解决电源产品的功能测试，有效的排除了手工测试产生错误的可能性！
2.能将测试数据完整地形成电子表格，永久存档以便追溯。
3.有效地降低测试成本，为客户赢取更多订单！
企业商务库
