标准产品型号表 | ||||||||
产品型号 | 隔离 电压(V) |
输入 | 输出 | 效率 (%) |
定购 状态 | |||
标称电压 (V) |
电压范围 (V) |
电压 (V) |
最大电流 (mA) |
最小电流 (mA) | ||||
E0505S-1W | 3000 | 5 | 4.5~5.5 | ±5 | ±100 | ±10 | 72 | OK |
E0509S-1W | ±9 | ±55 | ±5.5 | 72 | OK | |||
E0512S-1W | ±12 | ±42 | ±4.2 | 73 | OK | |||
E0515S-1W |
±15 |
±33 | ±3.3 | 74 | OK | |||
E1205S-1W | 12 | 10.8~13.2 | ±5 | ±100 | ±10 | 75 | OK | |
E1209S-1W | ±9 | ±55 | ±5.5 | 77 | OK | |||
E1212S-1W | ±12 | ±42 | ±4.2 | 78 | OK | |||
E1215S-1W | ±15 | ±33 | ±3.3 | 80 | OK | |||
E2405S-1W | 24 | 21.6~26.4 | ±5 | ±100 | ±10 | 72 | OK | |
E2409S-1W | ±9 | ±55 | ±5.5 | 78 | OK | |||
E2412S-1W | ±12 | ±42 | ±4.2 | 80 | OK | |||
E2415S-1W | ±15 | ±33 | ±3.3 | 83 | OK | |||
E4805S-1W | 48 | 43.2~52.8 | ±5 | ±100 | ±10 | 73 | OK | |
E4809S-1W | ±9 | ±55 | ±5.5 | 79 | OK | |||
E4812S-1W | ±12 | ±42 | ±4.2 | 82 | OK | |||
E4815S-1W | ±15 | ±33 | ±3.3 | 83 | OK |
一般特性 | |
产品工作时外壳温度 | ≤35℃ |
空载功耗 | ≤150mW |
冷却方式 | 自然空冷 |
工作温度 | -40℃~+85℃ |
存储温度 | -50℃ ~+125℃ |
存储湿度 | ≤95%(无凝结) |
外壳材料 | 阻燃耐热塑料(UL94V-0) |
平均无故障时间(MTBF) | >1,000,000小时 |
输出特性 | |||||
项目 | 测试条件 | Min | Typ | Max | Units |
额定功率 | 0.1 | 1 | W | ||
电压精度 | 见误差包络图 | ||||
线性电压调节率 | 输入电压变化±1% | ±1.2 | % | ||
负载调节率 | 负载从 10% 到 100% | ±10 | ±15 | ||
温度漂移系数 | 100%负载 | 0.03 | %/℃ | ||
纹波和噪声 | DC-20MHz带宽 | 100 | 260 | mVp-p | |
开关频率 | 100%负载 | 100 | KHz | ||
输出短路可持续时间 | 1 | S |
绝缘特性 | |||||
项目 | 测试条件 | Min | Typ | Max | Units |
绝缘强度 | 测试时间1分钟,Vin/Vout | 3000 | VDC | ||
绝缘电阻 | 绝缘电压500VDC,Vin/Vout | 1 | GΩ |